 |
 50 Pack Bohning Signature Arrow Nocks White fits Easton Beman Gold Tip Victory $11.35 Time Remaining: 4d 12h 38m Buy It Now for only: $11.35 |
 5 16 WHITE RED GREEN ARROW NOCKS 100 COUNT $7.96 Time Remaining: 3d 23h 21m |
 50 Pack Bohning Blazer F Nocks White fits G Easton ACC Beman Gold Tip Victory $11.35 Time Remaining: 4d 12h 38m Buy It Now for only: $11.35 |
 Gold Tip GT 246 White Nocks 1 Dozen $8.25 Time Remaining: 15d 9h 3m Buy It Now for only: $8.25 |
 48 Cedar Wood Traditional Arrows MERCURY INDEX SPEED Nocks 11 32 WHITE $6.49 Time Remaining: 11d 21h 48m Buy It Now for only: $6.49 |
 36 Bohning Signature Nocks carbon aluminum arrow WHITE $5.99 Time Remaining: 25d 12h Buy It Now for only: $5.99 |
 AAE Arizona 5 16 Z Nocks White 50 Pk $7.99 Time Remaining: 20d 7h 52m Buy It Now for only: $7.99 |
 DoubleTake Nockturnal GT Lighted Nock 3pk White NT 115 $24.99 Time Remaining: 1d 18h 14m Buy It Now for only: $24.99 |
 Carbon Express Thunderstorm Predator II Nock WHITE dz $6.88 Time Remaining: 2d 15h Buy It Now for only: $6.88 |
 50 Pack Bohning Signature Arrow Nocks White $9.00 Time Remaining: 17d 20h 13m Buy It Now for only: $9.00 |
 Gold Tip AccuLite Nocks White 1Dz $10.49 Time Remaining: 13d 9h 18m Buy It Now for only: $10.49 |
 Dozen QAD Tune A Nock F S 12 Nocks Choice Of Colors White Black Orange Green $5.95 Time Remaining: 26d 3h 48m Buy It Now for only: $5.95 |
 Easton X Nocks White $7.88 Time Remaining: 7d 13h 5m Buy It Now for only: $7.88 |
 Bohning Classic Nocks 5 16ths White 100 pack $11.95 Time Remaining: 3d 8h 26m Buy It Now for only: $11.95 |
 Gold Tip GT Series 22 Nocks WHITE 12 pack GT22 $6.75 Time Remaining: 16h 7m Buy It Now for only: $6.75 |
 12 Pack Bohning Signature Arrow Nocks White $3.00 Time Remaining: 17d 20h 12m Buy It Now for only: $3.00 |
 QAD Tune A Nock F S 100 Pk White $32.99 Time Remaining: 28d 23h 50m Buy It Now for only: $32.99 |
 Gold Tip Accu Lite Nock White dzn $7.88 Time Remaining: 20d 13h 57m Buy It Now for only: $7.88 |
 Bohning T Nock Arrow Nocks White 5 16 pk 100 $12.95 Time Remaining: 6d 19h 38m Buy It Now for only: $12.95 |
 Bohning Classic Nocks 5 16ths White dozen pack $2.25 Time Remaining: 3d 8h 28m Buy It Now for only: $2.25 |
 Bohning T Nock Arrow Nocks White 11 32 pk 50 $7.95 Time Remaining: 6d 19h 45m Buy It Now for only: $7.95 |
 Bohning F Easton G Arrow Nocks White Pk 25 $5.00 Time Remaining: 18d 10h 15m Buy It Now for only: $5.00 |
 Easton H Nocks White 1 Dz 098 $8.99 Time Remaining: 12d 10h 11m Buy It Now for only: $8.99 |
 Easton G Nock WHITE $7.88 Time Remaining: 18d 16h 56m Buy It Now for only: $7.88 |
 25 Pack Bohning Signature Arrow Nocks White fits Easton Beman Gold Tip Victory $7.40 Time Remaining: 4d 12h 38m Buy It Now for only: $7.40 |
 25 Pack Bohning Blazer F Nocks White fits G Easton Beman Gold Tip Carbon Victory $7.35 Time Remaining: 4d 12h 38m Buy It Now for only: $7.35 |
 50 Pack Bohning Blazer F Nock White fits G Nocks $9.00 Time Remaining: 2d 20h 17m Buy It Now for only: $9.00 |
 25 Pack Bohning Signature Arrow Nocks White $5.00 Time Remaining: 17d 20h 13m Buy It Now for only: $5.00 |
 Red White Blue Archery Release Bow String Nock D Loop Bowstring BCY 24 $3.50 Time Remaining: 28d 23h 33m Buy It Now for only: $3.50 |
 Easton G Nocks White Large Groove 50 Pack $26.00 Time Remaining: 5d 22h 30m Buy It Now for only: $26.00 |
 Bohning Classic Nock Arrow Nocks White 5 16 Pk 100 $12.95 Time Remaining: 4d 7h 21m Buy It Now for only: $12.95 |
 Gold Tip nocks White dozen pack $7.95 Time Remaining: 15d 15h 42m Buy It Now for only: $7.95 |
 Bow Fishing Arrow New Scale Splitter 30 White wrap with orang nock $26.99 Time Remaining: 26d 16h 11m Buy It Now for only: $26.99 |
 Easton Super Nocks WHITE dzn $6.88 Time Remaining: 2d 17h 13m Buy It Now for only: $6.88 |
 AAE Arizona 9 32 Z Nocks White 50 Pk $7.99 Time Remaining: 27d 10h 8m Buy It Now for only: $7.99 |
 Bohning Classic Nocks 11 32 White dozen pack $2.25 Time Remaining: 23d 15h 34m Buy It Now for only: $2.25 |
 25 Pack Bohning Pin Arrow Nocks Satin White fits Easton Beman Gold Tip Victory $11.35 Time Remaining: 4d 12h 38m Buy It Now for only: $11.35 |
 Easton H Nocks White Pkg of 12 $6.95 Time Remaining: 12d 21h 30m Buy It Now for only: $6.95 |
 Bohning Classic Nocks 11 32 White 100 pack $11.95 Time Remaining: 23d 15h 32m Buy It Now for only: $11.95 |
 Bohning Classic Nock Arrow Nocks White 5 16 Pk 50 $7.95 Time Remaining: 25d 9h 29m Buy It Now for only: $7.95 |
 12 Pack Bohning Signature Arrow Nocks White fits Easton Beman Gold Tip Victory $5.40 Time Remaining: 4d 12h 38m Buy It Now for only: $5.40 |
 AAE Arizona 5 16 Z Nocks White 100 Pk $11.99 Time Remaining: 11d 13h 22m Buy It Now for only: $11.99 |
 Bohning Signature Nocks White $5.99 Time Remaining: 27d 17h 51m Buy It Now for only: $5.99 |
 CARBON EXPRESS 20 SURGE LAZER EYE LIGHTED NOCK CROSSBOLTS orange white $29.00 Time Remaining: 4d 6h 39m Buy It Now for only: $29.00 |
 25 Pack Bohning Blazer Double Lock Nocks White fits Easton Victory Gold Tip $7.40 Time Remaining: 4d 12h 38m Buy It Now for only: $7.40 |
 Easton X Nocks Large Groove White 1 Dz $8.99 Time Remaining: 4d 15h 2m Buy It Now for only: $8.99 |
 DoubleTake Nockturnal X Lighted Nocks 3pk White NT 515 $24.99 Time Remaining: 11d 18h 35m Buy It Now for only: $24.99 |
 12 Accunocks Archery Nocks Bow Hunting Arrows Accunock Blue White fletching Tip $14.95 Time Remaining: 26d 13h 2m Buy It Now for only: $14.95 |
 EASTON G Nock 12 pack WHITE 1 dozen G Nocks 098 $8.25 Time Remaining: 28d 15h 3m Buy It Now for only: $8.25 |
 QAD Tune A Nock F S 12Pk White $6.85 Time Remaining: 11d 10h 8m Buy It Now for only: $6.85 |
 Bohning A Easton Axis Arrow Nocks White Pk 25 $5.00 Time Remaining: 20d 17h 42m Buy It Now for only: $5.00 |
 Signature Bohning Super Arrow Nocks White Pk 50 $10.00 Time Remaining: 27d 10h 13m Buy It Now for only: $10.00 |
 1 Dozen Easton G Nocks White Large Groove 12 Pack $8.00 Time Remaining: 5d 22h 29m Buy It Now for only: $8.00 |
 Bohning F Easton G Arrow Nocks White Pk 100 $18.00 Time Remaining: 18d 22h 47m Buy It Now for only: $18.00 |
 Arizona Z Nock Arrow Nocks White 11 32 pk 25 $4.95 Time Remaining: 25d 13h 23m Buy It Now for only: $4.95 |
 Bohning Blazer Double Lock Arrow Nocks White Pk 50 $10.00 Time Remaining: 13h 7m Buy It Now for only: $10.00 |
 1 Dozen Beiter Nocks White 12 2 12 Pack $8.50 Time Remaining: 6d 9h 51m Buy It Now for only: $8.50 |
 DoubleTake NockTurnal Lighted X Nocks 3 pack White NT 515 $24.99 Time Remaining: 18h 45m Buy It Now for only: $24.99 |
 Carbon Express TCX White Nocks 12 Pack 1 Dozen $7.50 Time Remaining: 6d 10h 23m Buy It Now for only: $7.50 |
 QAD Tune A Nock F S 36 Pk White $12.25 Time Remaining: 21d 13h 39m Buy It Now for only: $12.25 |
 Easton 3D Super Nock White 50 Pack $26.00 Time Remaining: 5d 22h 36m Buy It Now for only: $26.00 |
 Bohning Blazer Double Lock Arrow Nocks White Pk 12 $2.95 Time Remaining: 6d 18h 20m Buy It Now for only: $2.95 |
 Gold Tip GT Nock 246 White dzn $7.88 Time Remaining: 26d 11h 25m Buy It Now for only: $7.88 |
 12 WHITE SIGNATURE NOCKS FITS Beman ICS HUNTER ARROWS $3.29 Time Remaining: 8d 13h 20m Buy It Now for only: $3.29 |
 DoubleTake Nockturnal S Lighted Nocks 3pk White NT 215 $24.99 Time Remaining: 17d 18h 16m Buy It Now for only: $24.99 |
 Bohning T Nocks 11 32 100 Pk White $11.99 Time Remaining: 29d 11h 49m Buy It Now for only: $11.99 |
 12 Pack Bohning Blazer F Nocks White fits G Easton ACC Beman Gold Tip Victory $5.40 Time Remaining: 4d 12h 38m Buy It Now for only: $5.40 |
 12 Pack Bohning Blazer F Nock White fits G Nocks $3.00 Time Remaining: 16d 23h 50m Buy It Now for only: $3.00 |
 Flex Fletch Pro Nocks 5 16 White 100Pk $8.50 Time Remaining: 23d 12h 12m Buy It Now for only: $8.50 |
 Easton G Nocks White Large Groove 25 Pack $15.00 Time Remaining: 5d 22h 29m Buy It Now for only: $15.00 |
 Carbon Express TCX Nocks White Pkg of 12 $4.95 Time Remaining: 12d 8h 10m Buy It Now for only: $4.95 |
 Easton X NOCKS for ST Axis Carbon Shafts 1dz pk White $8.95 Time Remaining: 21d 4h 46m Buy It Now for only: $8.95 |
 Gold Tip Accu Tough Arrow NOCKS 204 stem for kinetic shafts 12pk White $8.25 Time Remaining: 4d 18h 56m Buy It Now for only: $8.25 |
 25 Pack Bohning Pin Arrow Nocks White $9.00 Time Remaining: 17d 22h 34m Buy It Now for only: $9.00 |
 Gold Tip 204 Accu Tough Nock White dzn $7.88 Time Remaining: 16h 11m Buy It Now for only: $7.88 |
 12 Pack Bohning Pin Arrow Nocks White $4.94 Time Remaining: 17d 22h 34m Buy It Now for only: $4.94 |
 Gold Tip Series Pin Nock White 1Dz $9.99 Time Remaining: 17d 9h 9m Buy It Now for only: $9.99 |
 50 Pack Bohning Blazer F Nocks Satin White fits G Easton Beman Gold Tip Victory $11.35 Time Remaining: 4d 12h 38m Buy It Now for only: $11.35 |
 Flex Fletch Pro Nocks 1 4 White 50Pk $6.00 Time Remaining: 23d 12h 11m Buy It Now for only: $6.00 |
 50 Pack Bohning Pin Arrow Nocks White $17.00 Time Remaining: 17d 22h 33m Buy It Now for only: $17.00 |
 1 dz Bohning Signature ARROW NOCKS WHITE Archery $4.49 Time Remaining: 12d 17h 59m Buy It Now for only: $4.49 |
 EASTON WHITE X NOCKS 2 DZ FREE SHIPPING USA $15.99 Time Remaining: 5d 13h Buy It Now for only: $15.99 |
 Alaska Bowhunting Supply Grizzly Stik White Nocks 1 dz $8.95 Time Remaining: 13h 31m Buy It Now for only: $8.95 |
 Bohning Classic Nock Arrow Nocks White 11 32 Pk 100 $12.95 Time Remaining: 21d 22h 37m Buy It Now for only: $12.95 |
 12 WHITE SIGNATURE NOCKS FITS Carbon Express MAXIMA $3.29 Time Remaining: 8d 13h 25m Buy It Now for only: $3.29 |
 1 DZ BOHNING SIGNATURE NOCKS 12 archery arrow WHITE $2.79 Time Remaining: 6d 11h Buy It Now for only: $2.79 |
 12 WHITE SIGNATURE NOCKS FITS Gold Tip XT HUNTER ARROWS $3.29 Time Remaining: 8d 13h 23m Buy It Now for only: $3.29 |
 Quality Archery Tune A Nock White $4.88 Time Remaining: 25d 15h 23m Buy It Now for only: $4.88 |
 Signature Bohning Super Arrow Nocks White Pk 100 $18.00 Time Remaining: 2d 11h 45m Buy It Now for only: $18.00 |
 Gold Tip Accu Tough 204 Nocks 204 White New 646 $8.99 Time Remaining: 26d 8h Buy It Now for only: $8.99 |
 SUPER NOCK Nocks Easton Fit FLATLINE Arrow WHITE 1 DZ $6.99 Time Remaining: 1d 10h 45m Buy It Now for only: $6.99 |
 50 Pack Bohning Pin Arrow Nocks Satin White fits Easton Beman Gold Tip Victory $19.25 Time Remaining: 4d 12h 38m Buy It Now for only: $19.25 |
 12 Easton Archery SUPER ARROW NOCKS WHITE Arrows New $7.95 Time Remaining: 18d 17h 43m Buy It Now for only: $7.95 |
 Bohning Classic Nock Arrow Nocks White 11 32 Pk 50 $7.95 Time Remaining: 6d 6h 41m Buy It Now for only: $7.95 |
 CARBON EXPRESS 20 SURGE LAZER EYE LIGHTED NOCK CROSSBOLTS green white $29.00 Time Remaining: 7d 5h 48m Buy It Now for only: $29.00 |
 Gold Tip GT 22 Series Nocks 12Pk White $5.29 Time Remaining: 23d 9h 12m Buy It Now for only: $5.29 |
 12 Pack Bohning Blazer F Nock Satin White fits G Nocks $3.00 Time Remaining: 17d 2m Buy It Now for only: $3.00 |
 Arizona Z Nock Arrow Nocks White 5 16 pk 50 $7.95 Time Remaining: 23d 7h 13m Buy It Now for only: $7.95 |
 25 Pack Bohning Blazer Double Lock Nocks Satin White $5.00 Time Remaining: 18d 7m Buy It Now for only: $5.00 |
 12 Pack Bohning Pin Arrow Nocks Satin White fits Easton Beman Gold Tip Victory $7.40 Time Remaining: 4d 12h 38m Buy It Now for only: $7.40 |
SR Leader class - 12PSB Test Bench - CP-60 Current Probe manufacturer
Background The basis of the Leader originated from a 1944 review of the Southern Railway's steam locomotive fleet, resulting in a Southern Railway design brief which called for a high-powered locomotive requiring little maintenance to replace the ageing fleet of M7 class tank engines.
The brief also stipulated that the locomotive would be used on both passenger and freight trains, requiring high route availability. Bulleid proposed an initial design based on his SR Q1 class locomotive, which had proved easy to maintain in service. As the proposal progressed, Bulleid saw that certain tasks required with conventional steam locomotives could be eliminated by adopting some of the features of the contemporary Southern electric locomotives. However, one of the subsequent designs of a 0-4-4-0 wheel arrangement had an unacceptably high axle-loading of 20 tons (20.4 tonnes), which increased the risk of damaging the Southern Railway's track. By developing the proposal further, Bulleid settled for a 0-6-6-0 design of bogied locomotive, which spread the weight more evenly over the rails and reduced the axle-loading. Design Works diagram of the Leader A series of initial ideas were presented to the Southern Railway management by Bulleid that incorporated double-ended running, giving the locomotive driver maximum visibility in either direction without a boiler or tender obscuring his view.
The need for a turntable to turn the locomotive around was therefore eliminated, although the initial designs were rejected by the operating department because of problems with welding technique. The accepted design included two 0-6-0 steam bogies with weight-saving sleeve valves and chains to couple the driving axles, as used on Bulleid's Pacifics. The boiler was offset to provide space for a communication corridor, allowing the driver to access both cabs without leaving the locomotive, an arrangement which led to later problems. The firebox, near the centre of the locomotive, was fed by the fireman from a third cab, linked to both driving cabs by the communication corridor. The entire ensemble was placed on a common frame, and thus often referred to as an 0-6-6-0 tank engine). The Leader prototype was constructed at Brighton railway works, and work began in 1946. An initial order of five locomotives was placed straight from the drawing board in 1946, and a further 31 were ordered in 1947, although with nationalisation looming this was merely a gesture. The latter order was cancelled after Southern Railway was taken into public ownership, to allow trials to be carried out on the prototype. Bogie and cylinder design Each of the two bogies had three cylinders, with the driving wheels connected by chains enclosed in an oil-bath, based upon Bulleid's chain-driven valve gear on his Pacific locomotives. The valve gear used the unusual sleeve valve arrangement that was also tested on the ex-LB&SCR H1 class Hartland Point in parallel with the construction of the first Leader locomotive.
The Leader was the first steam locomotive to use a form of sleeve valve since Cecil Paget's locomotive of 1908, and the concurrent testing of the principle on Hartland Point hints at the rushed nature of the locomotive's conception. The locomotive sat on the unusual Bulleid-Firth-Brown wheels, which were lighter, yet stronger, than the spoked equivalent. The use of sleeve valves and oil baths to lubricate the moving parts of the engine units was inspired by contemporary internal combustion engine practice. This included oscillating gear that gave a 25-degree axial movement to the sleeves, allowing even lubrication of the moving parts. However, this resulted in an over-complicated mechanism that was difficult to maintain, perpetuating the seizures it was meant to eradicate. This feature was removed from both bogies of the prototype as the trials progressed. Another innovative feature of the steam bogie assembly was the ability to interchange them when faults occurred, an easy operation for maintenance staff when compared to the complexities of overhauling a regular steam locomotive's motion. The three cylinders of each bogie were cast in mono-block format, each surrounded by two annular inlet steam chests and a single large outlet steam chest. These had the added function of keeping the cylinder heated by hot steam to maintain the temperature and pressure of steam entering the cylinders. However, these castings were difficult to machine accurately. The steam-sealing arrangements needed for this system were also complex, with each of the six cylinders and valve sleeves requiring 24 sealing rings. Boiler, firebox, smokebox and casing design The Leader boiler and firebox, showing the offset firehole door position (dotted). Also visible are two of the four thermic siphons The boiler was the culmination of lessons learned with the Pacifics, and was a prolific steam-raiser. All Leader boilers were constructed at Eastleigh, and proved to be the least problematic area of the entire design.
The boiler pressure was set at (280 psi (1.93 MPa)), and each was fitted with four thermic siphons from beneath the firebox to pre-heat water entering the boiler, used to great effect on Bulleid's Merchant Navy, West Country and Battle of Britain classes. The Leader had a "dry lining" firebox; it was not surrounded on top and sides by a "jacket" of water as in normal practice. It was constructed of welded steel, and used firebricks instead of water for insulation, which was a novel but troublesome solution to dry-lining the firebox. These had the effect of reducing the grate area from 47 square feet (4.4 m2) to 25.5 square feet (2.37 m2), and concentrated the fire in a small area. The firehole door was offset to the left of the boiler backhead, and was to provide difficulty for the fireman to add coal to the fire. The firebox was not initially equipped with a firebrick arch, although one was retro-fitted during the summer of 1950. The arch was problematic as it promoted the tendency for flames to enter the cab at high outputs, a situation made worse by the narrowing of the firebox area. The smokebox had an inherent problem in maintaining a constant vacuum. This was a result of another Bulleid labour-saving innovation, a sliding hatch controlled from the front cab that enabled ash to be cleaned out through a chute onto the track when on the move. The problem lay with ash manifesting itself around the edges of the slide, allowing air to leak into the smokebox, therefore reducing the overall efficiency of the locomotive. The fierce blast from the exhaust also meant that ash and embers were ejected into the atmosphere, creating a potential lineside fire hazard.
For ease of maintenance the boiler, firebox, smokebox and tender were encased in steel sheeting that resembled a modern diesel locomotive, a major departure from traditional steam locomotive design, allowing the engine to be cleaned using a carriage-washing plant. The tender was designed to carry 4 tons (4.06 tonnes) of coal and 4,000 imperial gallons (18,000 l; 4,800 US gal) of water, and was covered by a tarpaulin to prevent water ingress into the fireman's cab. Entry into the locomotive was by way of ladders leading up to sliding doors, although due to the bogie design, the climb into the fireman's cab necessitated clambering over the oilbath casing. Construction Construction of the first five Leader locomotives began at the Southern Railway's Brighton railway works in July 1947. British Railways inherited the Leader project upon nationalisation in 1948, which was far enough advanced to continue constructing the prototype, as Bulleid was still Chief Mechanical Engineer of the newly formed Southern Region of British Railways. Although work on the other four locomotives stalled, the prototype Leader emerged from Brighton as locomotive No. 36001 in June 1949. The other four members of the initial order made by the Southern Railway, Nos. 360025, were at varying stages of construction by the end of the development period. No. 36002 was almost complete, No. 36003 was without its outer casing, and Nos. 360045 were little more than sets of frames, although most of their major components had been constructed at Eastleigh and Brighton and were stored ready for fitting. With no prospect of further money being allocated by the Railway Executive for their completion, the unfinished locomotives were put into store at various depots around the former Southern Railway network pending a decision on their future. Operational details No. 36001 was immediately put into service trials using empty passenger carriage stock in the south-east of England. The official trial records kept at Brighton works reported varying degrees of success and failure on the runs undertaken. However, the results of the trials as reported to British Railways headquarters at Marylebone were "conspicuous by the absence of praise" for the strengths of the Leader, namely the boiler, braking system and total adhesion provided by the two bogies. Several theories have been put forward regarding this state of affairs, the most plausible being that the more conservative members of the railway workforce at Brighton and the Railway Executive felt that the Leader was too revolutionary, and were keen to maintain the status quo. Performance of No. 36001 The Leader being lifted onto its power bogies at Brighton, May 1949. The casing allowed the locomotive to be put through a carriage-washing plant Following trials that lasted over a year, No. 36001 was shown to have several flaws, including heavy coal and water consumption, mechanical unreliability, untenable working conditions for both fireman and driver, loss of steam through the cylinder rings and uneven weight distribution on the bogies.
After renewing the cylinder assembly, it was tested around Brighton and Eastleigh using an LNER Dynamometer car, where good running was experienced at high costs in fuel and effort on the part of the fireman. The Leader was tested against the performance of a U class control locomotive, and indicated that the brake release was too slow in service for use on tight schedules despite the brake application being noted as the best used on a Bulleid design. Throughout No. 36001's trials the firebrick lining provided a constant problem by continually collapsing into the fire. The firebricks were then replaced with cast iron substitutes that melted in the intense heat of the firebox, which were in turn replaced by thicker 9 inches (23 cm) firebricks. Some of the firemen allotted to the Leader complained about cramped conditions in the centre cab of the locomotive, a situation made worse by flames entering the cab from the firebox at high outputs. It was an enclosed space that was constantly hot, and the single fireman's entrance door on the side of the locomotive was left open during travel to promote ventilation. The door into the fireman's cab also attracted criticism, as it would have been blocked in the event of the locomotive overturning on that side, preventing the fireman's escape, so that members of the railway trade union ASLEF threatened to stop their crews from operating the Leader. The offset boiler and tender caused the locomotive's centre of gravity to be shifted to one side. Experiments had to be undertaken to balance the locomotive by filling the linking corridor with large quantities of scrap metal, replaced in a re-design by a raised floor covering weighted material. These modifications resulted in the engine exceeding the total weight limit of 150 tons (151 tonnes), severely limiting the design's route availability during testing. A related problem was that despite being a tall locomotive, at 12 feet 11 inches (3.94 m), the cab ceilings were relatively low.
The cab at the smokebox end of the locomotive suffered from the same excessive heat as did the fireman's cab. To circumvent this problem the locomotive was used in reverse, as the rear cab was next to the water tank and coal chute, and therefore away from the hot gases circulating inside the smokebox. Despite its problems the locomotive displayed outstanding steaming characteristics and total traction from the two power bogies on its trial runs. When properly fired the Leader was capable of keeping up with the schedules, even running ahead on occasions. However, operational difficulties when stopping for water tended to lose any time advantages gained, and affected the published performance figures. Despite hauling test trains over the Central Section of the former Southern Railway, the Leader prototype was never used on a revenue-earning service because of the risk of failure of the valve gear, and the adverse publicity this would cause for British Railways. Livery and numbering Southern Railway When the project was under the auspices of the Southern Railway, No. 36001 would have been numbered CC101. Bulleid advocated a continental style of locomotive nomenclature, based upon his experiences at the French branch of Westinghouse Electric before the First World War, and those of his tenure in the rail operating department during that conflict. The Southern Railway number followed an adaptation of the UIC classification system where "C" refers to the number of driving axles in this case three on each bogie. Since the design has six driving axles, the numbering would have been CC101C105 with the initial batch, the final number being the locomotive identifier. British Railways Operational livery was ex-works photographic grey with red and white lining. The British Railways "Cycling Lion" crest was also used, though after the works photograph this was painted over without explanation. Numbering was the British Railways standard system, in the 36001 series. If the class had gone into full production, the locomotives would have been painted in British Railways mixed traffic/freight black livery with red, grey and cream lining. 36001 was initially painted in this livery, but this preceded the official works photograph and was subsequently repainted in photographic grey livery. Operational assessment Despite the high expectations attached to the Leader, it was not the motive power revolution that Bulleid intended it to be. No part of the Leader design was perpetuated on the British Railways Standard class locomotives by Robert Riddles, nor did it find favour internationally, with the Garratt articulated locomotives providing a similar function for less maintenance.
The whole concept was quietly dropped in 1951 after Bulleid left British Railways to become Chief Mechanical Engineer of Cras Iompair ireann (where he produced CI No. CC1, a peat-burning locomotive to a similar design), and all five were scrapped. The culmination of the project was a 178,865 5s 0d (4,074,550.40 in today's money, converted at the 1950 rate) bill for the taxpayer, though when the press reported the story as late as 1953, 500,000 (11,390,000.00) was claimed to have been wasted on the project. R. G. Jarvis, who was placed in charge of the project after Bulleid's departure, insisted that the locomotive required an entire re-design to solve the problems of the original concept. No members of the Leader class survived the 1950s, and only the numberplates of No. 36001 and No. 36002 are known to exist. The numberplate for No. 36001 is located in the National Railway Museum, although a locomotive builder's plate intended for the locomotive, but never fitted in service, was sold at auction in 2008. The Leader was a bold attempt at pushing back the boundaries of contemporary steam locomotive design, and if successful, would have prolonged the life of steam on Britain's Railways. References Notes ^ a b c Bulleid (1977), p. 143 ^ a b c Bulleid (1977), p. 135 ^ a b c d e Day-Lewis (1964), The Leader locomotive ^ a b Bulleid (1977), p. 129 ^ Bulleid (1977), p. 136 ^ a b c d e f g h i j Haresnape (1979), Section 4 ^ Robertson (2007), p. 116 ^ a b c Harris (1994), p. 115 ^ Robertson (2007), p. 42 ^ a b Robertson (2007), p. 46 ^ a b c Tuplin (1965), p. 413 ^ a b Robertson (2007), p. 47 ^ a b c Tuplin, p. 414 ^ Robertson (2007), p. 77 ^ Robertson (2007), p. 25 ^ a b c d e Harris (1994), p. 116 ^ Bulleid (1977), p. 145 ^ a b Harris (1994), p. 117 ^ Tuplin (1965), p. 415 ^ a b Robertson (2007), p. 95 ^ Bulleid (1977), p. 125 ^ Bulleid (1977), p. 140 ^ Bulleid (1977), p. 141 ^ Cox (1966), p. 18 ^ Cox (1966), p. 19 ^ Robertson (2007), p. 151 ^ Bulleid (1977), p. 151 ^ Cox (1966), p. 16 ^ Robertson (2007), p. 87 ^ Robertson (2007), p. 158 ^ Robertson (2007), p. 156 ^ Robertson (2007), p. 150 ^ Burridge (1975), p. 60 ^ Robertson (2007), p. 37 ^ Sunday Dispatch, 18 January 1953 ^ Robertson (2007), p. 110 ^ Great Central Railwayana Auctions (2007) Auction Catalogue: Great Central Railwayana, 6 October 2007, Retrieved February 17, 2009. Sold for 1050, see Lot 24. Bibliography Bulleid, H. A. V.: Bulleid of the Southern (Hinckley: Ian Allan Publishing, 1977) ISBN 071100689X Burridge, Frank: Nameplates of the Big Four (Oxford Publishing Company: Oxford, 1975) ISBN 0902888439 Cox, E. S.: Locomotive Panorama (London: Ian Allan, 196566), Vol. 2 Day-Lewis, S.: Bulleid, Last Giant of Steam (London: George Allen & Unwin, 1964) Haresnape, Brian: Bulleid Locomotives: A Pictorial History (London: Ian Allan, 1979) Harris, Michael: "Firing Bulleid's 'Leader'" (Steam Days: 66, 1994) Robertson, Kevin: The Leader Project: Fiasco or Triumph? (Oxford: Oxford Publishing Company, 2007) ISBN 0860936066 Sunday Dispatch, 18 January 1953 Tuplin, W.A.: "The ill-fated 'Leader'" (Railway World: 26, 1965) Further reading Ian Allan ABC of British Railways Locomotives, 1950 edition Carter, Ernest F.: Unusual Locomotives (Frederick Muller Ltd., 1960) Nock, O.S.: Southern Steam (Newton Abbot: David and Charles, 1972) Robertson, Kevin: Leader and Southern Experimental Steam (Stroud: Alan Sutton Publishing, 1990) Tufnell, Robert: Prototype Locomotives (Newton Abbot: David and Charles, 1985) External links Trains portal "Leader" class locomotive v d e Principal Locomotives of the Southern Railway Urie: H15 class N15 class S15 class Maunsell: K and K1 classes L1 class Lord Nelson class N class N1 class N15 (King Arthur) class N15X class Q class U class U1 class V "Schools" class W class Z class Bulleid: Leader class Merchant Navy class Q1 class USA class West Country and Battle of Britain classes Non-steam locomotives: Diesel shunters 1 to 3 Diesel shunters 15211 to 15236 Mainline diesels 10201 to 10203 Electrics CC1 to CC3 British Railways steam locomotives GWR locomotives LMS locomotives LNER locomotives Southern Railway locomotives Categories: Southern Railway locomotives | 0-6-6-0 locomotives | Articulated locomotives | Experimental locomotives | Railway locomotives introduced in 1949Hidden categories: Unusual parameters of Infobox locomotive template | Featured articles
About the Author
I am an expert from repairtestequipments.com, while we provides the quality product, such as 12PSB Test Bench , CP-60 Current Probe manufacturer, rail repair tools,and more.
chubby kid nocks down white boy